KB20
Cormidi multifunctional spider platform: aerial basket up to 19.4 m, crane up to 850 kg, 400 kg winch and under-bridge work down to -5 m. Bi-energy: Honda IGX440 petrol engine + 220/110 V electric power supply. Electronically controlled proportional hydraulic controls.
KB20 is a tracked multifunction spider aerial platform (basket, crane, winch, below-deck work). Manufacturer: Cormidi S.r.l. (Roccadaspide, Italy). Basket configuration: working height up to 19.4 m, outreach 11.2 m, capacity 250 kg. Crane configuration: capacity up to 850 kg, working radius 9.5 m, height up to 15 m. Winch: capacity up to 400 kg. Below-deck work: down to 5 m below the support surface. Engine: Honda IGX440 (petrol) or electric supply 220/110 V — 50/60 Hz — 2.2 kW. Key facts: 4 configurations available; warranty up to 2 years.
Data source: official Cormidi technical datasheet. Measurement: capacity declared by the manufacturer. Last technical revision: 10/08/2026.
4 machines in one
Aerial platform, crane, winch and below-deck work in a single spider. One machine that gets in where needed and changes trade on the jobsite: you don't rent four, you buy one.
Control it from a distance, with one finger
35-function wireless remote control with 3-inch display: drive, stabilise and work while staying in the safest position, with the precision of proportional control.
Dual-energy: petrol outside, mains inside
Honda IGX440 engine outdoors, 220/110 V electric power indoors: zero fumes inside, autonomy outside. The AIESS system manages the engine on its own — lower consumption, less noise.
Stable automatically
Fully automatic stabiliser and destabiliser (SSF): the machine secures itself before rising to height. You focus on the job, it takes care of stability.
Climbs and lasts on any ground
Oscillating rollers that follow the ground and Cormidi Heavy Duty tracks: grip at all times, even on rough terrain, and a long-lived undercarriage. Greasing the rollers is easy, with nothing to disassemble.
It reaches where others can't
Hydraulic-extension articulated arm: up to 36.7 ft of outreach and 57 ft of working-area reach. Reach points impossible for a traditional platform.
Basket
Crane
Winch
Underbridge
Dimensions in mm.
| Combustion engine | Honda IGX440 a controllo elettrico |
| Electrical power supply | 220/110 V — 50/60 Hz — 2.2 kW |
| Controls | electronically controlled proportional hydraulic |
| Outriggers | with electronic control |
| Levelling | hydraulic with electronic control |
| Hydraulic pump | no. 3 gear-type — 240 bar |
| Oil tank | 35 lt |
| Travel speed | 0-2.6 km/h |
| Max climbable gradient | 20° in the direction of travel |
| Max wind speed | 12,5 m/s |
| Weight (without operator) | 3.210 kg (+/- 6%) |
| Warranty | up to 2 years |
- Dual-energy: Honda IGX440 engine + 220/110 V electric supply (2.2 kW)
- Electronically controlled outriggers
- Electronically controlled hydraulic platform levelling
- Hydraulic extension working arm
- Electronically controlled proportional hydraulic controls
- Oil tank capacity 35 l
- Max wind speed 12.5 m/s
- Warranty up to 2 years
