Real Job Sites · Concrete Results
Case Studies History
Cormidi machines at work. Every story is real: less manpower, less risk, more efficiency.
Crew in Perfect Sync on the Synthetic Field
Read the story →
—
The Challenge
The job site required a coordinated operation among multiple workers for the installation of synthetic surfaces, with tight deadlines and the need for maximum operational efficiency.
The Cormidi Solution
The Cormidi machine allowed the crew to work smoothly and in sync, supporting the job site phases without disrupting the workflow of the ground operators.
The Result
The entire crew was able to operate in sync, reducing downtime and maintaining a steady pace throughout the synthetic surface installation.
One operator
Made in Italy
Tight spaces
Restricted areas
Low center of gravity
Hi Tip
Elevated discharge
Stability on slopes
Single operator
Narrow access
High productivity
Thirty years of reliability
Robust construction
Long-lasting
Cormidi
Scopri la →
Waterfront jobsite: the Cormidi dumper keeps going
Read the story →
Acme Built — Sydney, Australia
The Challenge
A coastal construction site with limited operating space and complex logistics. Moving materials in such an environment requires compact, reliable machines capable of working without interruption.
The Cormidi Solution
The Cormidi dumper entered the jobsite and handled material transport with efficiency. Its compact size and tracked drive make it well suited to unstable or sandy ground typical of coastal areas.
The Result
The project was able to move forward without delays thanks to the machine. The Acme Built team maintained their planned work pace even in a demanding environment.
Coastal area
Unstable ground
Operational compactness
Single operator
Made in Italy
Tight spaces
Restricted access
Low center of gravity
Hi Tip
Elevated discharge
Slope stability
One operator
Narrow access
High productivity
Thirty-year reliability
Robust construction
Long service life
Cormidi
Scopri la →
C85 for rent: 850 kg payload for tight job sites and tough terrain
Read the story →
Crowley Hire — Rochester & Greece, New York
The Challenge
The modern job site demands machines capable of operating in confined spaces, on rough terrain, and moving large quantities of material quickly. Masons, landscapers, plumbers, pool builders, concrete contractors, and civil crews had long been looking for a compact dumper with high payload capacity. Demand was strong, but the right machine was slow to arrive.
The Cormidi Solution
The Cormidi C85 tracked mini dumper, with an 850 kg (1,874 lb) payload capacity, meets the needs of residential and civil job sites point by point. The tracked undercarriage ensures traction and stability on any surface. Its compact dimensions allow access to spaces where traditional equipment simply cannot go. The high tip dumping function enables direct discharge into raised skips or containers, eliminating extra manual handling.
The Result
A single operator can manage the transport of heavy material even in difficult-access conditions, reducing time and fatigue on site. The versatility of the C85 makes it suitable for a wide range of applications, from civil work to landscaping. The machine is now available for daily rental at Crowley Hire.
View the post on Instagram →
850 kg payload
Tight access
High tip
Tracked undercarriage
Single operator
Made in Italy
Confined spaces
Restricted spaces
Low center of gravity
Hi Tip
Elevated discharge
Slope stability
One operator
Tight access
High productivity
Thirty years of reliability
Robust construction
Long service life
Cormidi
Scopri la →
Work on site: machine in motion, dirt moving forward
Read the story →
—
The Challenge
The job site demands operational continuity and focus. The operator must work independently, without interruptions, maintaining a steady pace throughout the entire day.
The Cormidi Solution
The Cormidi machine delivers stability, speed, and consistent performance over time. A single operator can handle the machine and carry the work forward in full autonomy.
The Result
Work moves forward without downtime. Productivity stays high from the start to the end of the shift, with a single operator at the controls.
Operational stability
Consistent performance
Single operator
Made in Italy
Tight spaces
Confined spaces
Low center of gravity
Hi Tip
Elevated discharge
Stability on slopes
One operator only
Narrow access
High productivity
Thirty-year reliability
Robust construction
Long service life
Cormidi
power buggy
Poly skip
Zero cement adhesion
740mm width
Rubber tracks
40% gradient
Rental-grade reliability
850 kg payload
850 kg capacity
Tracks
Daily reliability
Track drive
Forest mulcher
Single pass
On-site chipping
Multifunctional
Ease of use
Full range
Reliability
Quality design
Jobsite reliability
Versatility on any terrain
Access in tight spaces
Stabilizer tracks
Fresh concrete transport
Rental ready
High maneuverability
Proven reliability
Zero machine downtime
Easy maintenance
Heavy-duty applications
Scopri la →
3 photos
Renovation on a cliff by the sea: the CLX1500 wins where others give up
Read the story →
— Historic center, Cilento
The Challenge
A renovation jobsite in a historic center of Cilento, perched on a cliff above the sea. Tight spaces, difficult access, and lateral slopes prohibitive for any other machine in its class. An extreme setting that ruled out traditional solutions from the start.
The Cormidi Solution
The Cormidi CLX1500 tackled the critical lateral slopes thanks to its patented extendable undercarriage, which provides the superior lateral stability required at every stage of work. The high operating speed and arm force allowed safe, efficient work even under the most demanding conditions on site.
The Result
The jobsite, considered virtually impossible with any other machine, was completed in just a few days. The speed of execution generated significant profit margins, turning a high-risk operation into a concrete economic success.
Patented extendable undercarriage
Lateral stability
High operating speed
Arm force
Single operator
Made in Italy
Tight spaces
Confined spaces
Low center of gravity
Hi Tip
High-level discharge
Stability on slopes
One operator only
Narrow access
High productivity
Thirty years of reliability
Robust construction
Long service life
Cormidi
Scopri la →
Digging and hauling with zero downtime: CLX1500 at work
Read the story →
—
The Challenge
On the job site you need power, stability, and precise control at every stage of the work cycle. Any hesitation in the movements translates into mistakes, wasted material, and idle time. Working in tough conditions demands a machine that holds up both during digging and during transport.
The Cormidi Solution
The CLX1500 goes to work with a high-penetration bucket that bites into the material with authority. The track system provides a solid base throughout all maneuvers, eliminating oscillation and instability. High-performance hydraulics combined with precise movement control allow material to be collected and moved effectively, cycle after cycle.
The Result
Every digging and hauling cycle runs at peak efficiency: the machine digs in, collects, and travels without losing time. Movement control reduces operator errors and boosts overall site productivity.
High-penetration bucket
Stabilizing tracks
Precise control
High cycle efficiency
Proven reliability
Zero machine downtime
Easy maintenance
Made in Italy
Log Grab
Multi-function
Interchangeable attachments
Single machine
Forestry mulcher
Single pass
On-site chipping
Single operator
Tight spaces
Low center of gravity
Hi Tip
Discover the CLX-1500 →
CLX1500 on demo: unmatched power, ultra-responsive controls
Read the story →
BR.MAT — Chavanay
The Challenge
The jobsite demands a multi-purpose machine capable of working in tough conditions, with precise and responsive controls. Finding a tool carrier with real power and a design built for intensive use is no easy task. Operators need a machine that responds instantly to commands, with no compromises.
The Cormidi Solution
The Cormidi CLX1500 steps in as a next-generation tool carrier. Unmatched power compared to competitors in its class, ultra-sensitive controls for precise and intuitive operation, and an aggressive design engineered for demanding work environments. A single operator manages everything from the control station.
The Result
The machine impresses from the very first test drive: immediate response to commands and performance that exceeds expectations. Authorized dealer BR.MAT in Chavanay offers the opportunity to try the CLX1500 directly in the field, with no commitment. Those who cannot visit the show can still arrange a demo session on site.
Superior power
Ultra-sensitive controls
Aggressive design
Single operator
Proven reliability
Zero downtime
Easy maintenance
Made in Italy
Log Grab
Multi-purpose
Interchangeable attachments
One machine does it all
Forestry mulcher
Single pass
On-site chipping
Tight spaces
Low center of gravity
Hi Tip
High-level discharge
Discover the CLX →
CLX1500 takes center stage at SalonVert: live performance at the booth
Read the story →
—
The Challenge
The green and landscaping industry demands multifunctional machines capable of demonstrating their performance in demanding exhibition settings, where professionals can closely evaluate reliability and build quality before making any purchasing decision.
The Cormidi Solution
Cormidi brought the CLX1500 to SalonVert, the industry's leading trade show, displaying it at Stand 111. The CLX1500 is a multifunctional tracked machine designed to deliver high operational performance, designed and built in Italy to guaranteed quality and after-sales service standards.
The Result
The direct presence at the trade show allowed operators and industry professionals to see the CLX1500 in action, experience its ruggedness firsthand, and engage directly with the Cormidi team on performance, configurations, and after-sales support.
View the post on Instagram →
Multifunctional machine
Made in Italy
After-sales service
Trade show performance
Single operator
Tight spaces
Low center of gravity
Hi Tip
High-level discharge
Stability on slopes
Confined spaces
Single operator
Narrow access
High productivity
Thirty years of reliability
Robust construction
Long service life
Cormidi
power buggy
Discover the C85 CMF CLX KB →
Two CMF Units in Action: High-Performance Material Handling in Tight Spaces
Read the story →
—
The Challenge
The jobsite featured tight spaces that made access impossible for conventional equipment. Moving materials under these conditions would have required long lead times and a high labor input.
The Cormidi Solution
Two Cormidi CMF machines were deployed simultaneously for material transport. Their compact dimensions and high performance allowed efficient operation even in the narrowest areas of the jobsite.
The Result
Running the two CMF units in tandem maximized on-site productivity, ensuring continuous material flow and reducing downtime. Tight spaces that had previously been an obstacle were handled without compromise.
Tight spaces
High productivity
Dual machine
Forestry mulcher
Single pass
On-site chipping
Heavy-duty applications
Narrow spaces
Single operator
Fast delivery
Made in Italy
Low center of gravity
Hi Tip
Elevated discharge
Stability on slopes
Restricted areas
Single operator
Narrow access
Discover the CMF →
780 mm Narrow Access: Excavation, Backfill and Grading in 2 Days
Read the story →
Groundbreakers —
The Challenge
The job site featured very narrow passages, with a minimum width of approximately 780 mm (30.7 in), making access impossible for conventional machines. Excavation, grading and backfill operations (fill material, topsoil and turf) were required alongside a new retaining wall, in an extremely confined space.
The Cormidi Solution
The Cormidi C7X tracked minidumper, paired with a Kubota U10-5 excavator, allowed both machines to operate together in spaces with a minimum width of approximately 780 mm (30.7 in). The C7X provided continuous transport of fill material, topsoil and turf along the narrow side accesses of the property, while also enabling preparation of the subbase for the concrete formwork.
The Result
The job was completed in just 2 days. The entire area was cleared, leveled and fully reinstated, including preparation of the side access for concrete formwork, without requiring larger equipment or extensive manual labor.
780 mm narrow access
Compact job site
Excavator-dumper duo
Completed in 2 days
Made in Italy
Tight access
Single operator
High productivity
Rental-ready
One operator
High maneuverability
Tight spaces
Low center of gravity
Hi Tip
Elevated discharge
Slope stability
Confined spaces
Thirty years of reliability
Robust construction
Discover the C7X →
No-access foundation pour: fresh concrete where nothing reaches
Read the story →
—
The Challenge
A foundation pour job site for a retaining wall located in an area completely inaccessible to traditional equipment. The confined space did not allow wheelbarrows or standard concrete mixers to pass through. Every meter of the route was a real obstacle for transporting fresh concrete.
The Cormidi Solution
The Cormidi tracked mini dumper, thanks to its compact dimensions and full track drive, reached the pour point where no other machine could access. The equipment transported fresh concrete continuously and in a controlled manner, maintaining stability even on uneven ground and through narrow passages. A single operator managed the entire operation.
The Result
The foundation pour was completed without interruptions and without resorting to additional labor for manual transport. Site time was significantly reduced and the risk of accidents related to manually carrying heavy loads was eliminated.
Access in tight spaces
Stabilizing tracks
Single operator
Fresh concrete transport
One operator
Made in Italy
Tight spaces
Low center of gravity
Hi Tip
High discharge
Stability on slopes
Confined spaces
Narrow access
High productivity
Thirty-year reliability
Robust construction
Long lifespan
Cormidi
mini dumper
Scopri la →
C85: working power and jobsite appeal
Read the story →
Fullscope Hire —
The Challenge
The jobsite demands a reliable machine capable of operating in demanding conditions without failure. It must combine ruggedness and maneuverability — qualities that are rarely found in a single piece of equipment.
The Cormidi Solution
The C85 tracked mini dumper by Cormidi delivers solid performance and a look that turns heads. Built in Italy, it combines real hauling capacity with a compact footprint that makes it versatile on any type of terrain.
The Result
On the jobsite, the C85 works without surprises: reliable, efficient, always ready. A machine that gets people talking even after working hours.
The C85 is a reliable and truly incredible machine — beautiful and sleek.
Fullscope Hire
Jobsite reliability
Made in Italy
Versatility on any terrain
Discover the C85 →
Reliable rental: Cormidi machines always ready on site
Read the story →
Fullscope Hire —
The Challenge
Anyone working on a job site needs reliable machines — available immediately and without surprises. Finding professional equipment for hire, with guaranteed efficiency and Italian design, is not always straightforward. Downtime caused by breakdowns or unavailability hits costs and work schedules hard.
The Cormidi Solution
Fullscope Hire provides Cormidi tracked minidumpers — C6X, C7X, C8X, C85 and the CMF multi-function machines — through an equipment hire and haulage service. Made in Italy machines, engineered to work in demanding conditions, with proven reliability and careful maintenance. A single operator can run them, with no special licenses required.
The Result
The job site gets going straight away, with no waiting. The machine arrives ready to use thanks to the included haulage service. Italian reliability and immediate availability: less downtime, more productivity in the field.
Fast hire
Made in Italy
Single operator
Transport included
Rental reliability
One-man operation
Ease of use
Full range
Tight spaces
Low center of gravity
Hi Tip
High-level discharge
Slope stability
Restricted spaces
Narrow access
High productivity
30 years of reliability
Robust build
Long service life
Scopri la C6X C7X C8X C85 CMF →
800 kg payload on tracks: the C8X you'll never want to give up
Read the story →
Work Services 44 —
The Challenge
The job site required moving heavy loads in conditions where a traditional wheeled machine would have shown its limits. What was needed was a reliable, compact machine with a payload capacity suited to everyday operational demands.
The Cormidi Solution
The Cormidi C8X tracked mini dumper, with a payload of 800 kg (1,764 lb), met every requirement of the job site. The tracks ensure stability and traction on any surface, making the machine effective even in the most demanding environments.
The Result
Since the C8X joined the fleet, it has become an indispensable tool for the Work Services 44 team. On-site productivity has gained in continuity and operational safety.
I'll never be able to do without it again.
800 kg payload
Tracks
Daily reliability
Single operator
Made in Italy
Tight spaces
Low center of gravity
Hi Tip
Elevated discharge
Stability on slopes
Confined areas
Narrow access
Single operator
High productivity
Thirty-year reliability
Robust construction
Long service life
Cormidi
Discover the C8X →
Tight Access and Uneven Ground: the C8X Keeps Going
Read the story →
Matko Hire —
The Challenge
Many landscaping, construction and earthmoving sites feature restricted access and uneven surfaces. Moving material in these conditions with conventional equipment is slow, risky and requires multiple operators. Loading skips, trailers or raised areas becomes a complicated task without the right machine.
The Cormidi Solution
The Cormidi C8X tracked minidumper is designed to work in exactly these conditions. With a payload of up to 800 kg (1,764 lb) and a high-tip skip, it allows direct discharge into skips, trailers and raised platforms with no effort. Tracked drive ensures stability and grip on broken ground, maintaining full control even in the most demanding conditions.
The Result
Sites with tight access and uneven terrain are handled quickly and efficiently. A single operator can transport and discharge material in locations otherwise unreachable by conventional equipment. Hiring through Matko Hire puts this machine within reach of anyone who needs it, with no direct capital investment.
High tip
800 kg payload
Tracked drive
Tight access
Single operator
Low centre of gravity
Poly skip
Zero cement adhesion
740 mm width
Rubber tracks
40% gradient
Made in Italy
Confined spaces
Hi Tip
Elevated discharge
Stability on slopes
Restricted spaces
Narrow access
One operator only
Discover the C8X →
Tight space, maximum output: stones and dirt can't stop the CMF
Read the story →
— Fitzroy
The Challenge
The Fitzroy jobsite left little room to maneuver. Moving stones, soil, and rocks in such confined conditions pushed both men and machines to the limit. What was needed was a machine capable of working without giving up, even where others can't get through.
The Cormidi Solution
Cormidi's CMF went into action with full force and power. Compact in its movements yet tireless in performance, it handled heavy materials such as stones, soil, and rocks without missing a beat. One machine, one operator, continuous work.
The Result
The jobsite moved forward without interruption, despite the limited space. The CMF proved once again that strength, compactness, and Made in Italy reliability make the difference in the field.
Heavy materials
Confined spaces
Single operator
Made in Italy
Forestry mulcher
Single pass
On-site chipping
Heavy-duty applications
Low center of gravity
Hi Tip
Tight spaces
High-level discharge
Stability on slopes
Restricted areas
Narrow access
Single operator
High productivity
Thirty years of reliability
Robust construction
Discover the CMF →
Tight spaces: fast delivery and top profit with the CMF
Read the story →
—
The Challenge
Wheelbarrows aren't enough anymore. On jobsites with narrow access and tight delivery schedules, every minute lost to manual transport is a direct hit to your margin. Labor runs out, pace slows down, and the client is left waiting.
The Cormidi Solution
The Cormidi CMF gets where traditional machines can't. Diesel-powered, compact and fast, it moves material continuously without stopping between loads. A single operator manages the entire transport cycle, eliminating the downtime that comes with wheelbarrows.
The Result
The job gets done ahead of schedule, with fewer workers tied up in transport. The contractor's margin increases: fewer hours worked, same amount of material moved, client satisfied on time.
Tight spaces
Single operator
Fast delivery
Time savings
Discover the CMF →
C85 ML at 250 hours: zero issues, zero downtime
Read the story →
—
The Challenge
A work machine has to hold up through months of intensive jobsite use without breaking down. The operator opened the hood of the C85 ML after 11 months of continuous use for a full inspection: hydraulic oil and overall machine condition under review. The question was simple: does it still hold up?
The Cormidi Solution
The C85 ML passed the inspection with flying colors. At 250 hours of work and nearly a year on the jobsite, the inspection confirmed everything was in order. Clean hydraulic oil, machine fully intact. No repairs, no unplanned downtime. Made in Italy build quality made the difference.
The Result
Eleven months of continuous operation without a single technical issue. Zero unscheduled service calls, zero loss of productivity. The C85 ML proves itself a reliable machine over the long haul, exactly what you expect from a professional work machine.
Took the cover off the C85 today. Checked the hydraulic oil and inspected the machine. 250 hours, 11 months in and still going strong. I've had zero problems with this skid steer. Love it.
Proven reliability
Zero machine downtime
Easy maintenance
Made in Italy
Discover the C85 ML →
Open Day: the CMF from concrete mixer to miniloader in minutes
Read the story →
—
The Challenge
Demonstrating real versatility of a multifunctional machine on the jobsite. The operator needs to switch quickly from one application to another without losing time or changing equipment. The challenge is having a single machine capable of performing different tasks in sequence, with quick-attach compatibility with attachments already on site.
The Cormidi Solution
The Cormidi CMF, star of the Factory Open Day, gave a live demonstration of its quick-attach system: in just a few minutes it goes from concrete mixer to miniloader configuration, with no tools and no external assistance. A single operator handles everything. The CMF is compatible with Bobcat and Toro attachments, allowing reuse of accessories already available on site.
The Result
The demonstration confirmed the CMF's operational flexibility in real-world conditions. A single machine replaces multiple pieces of equipment, reducing fleet costs and downtime between applications. Compatibility with third-party brand attachments further expands the range of possible uses with no additional investment.
Quick attach
Universal compatibility
Single operator
Multifunctional
Made in Italy
Low center of gravity
Hi Tip
Tight spaces
High discharge
Stability on slopes
Confined areas
Narrow access
Single operator
High productivity
Thirty-year reliability
Robust construction
Long service life
Cormidi
power buggy
Discover the Cormidi Range →
Safe Material Transport: Even in Tight Spaces and on Slopes
Read the story →
—
The Challenge
Transporting materials on job sites under difficult conditions is one of the most common challenges: tight spaces, slopes, and uneven terrain put both workers and equipment to the test. Traditional methods require multiple operators, take longer, and pose real safety risks.
The Cormidi Solution
The Cormidi range — including models C6X, C7X, C8X, C85, CMF, and C200 — is designed to operate safely even on the most demanding job sites. The tracked undercarriage ensures stability on slopes and uneven ground, while the compact dimensions allow work in areas where other machines simply cannot go.
The Result
Material transport becomes faster, safer, and more efficient, with a single operator able to manage the entire operation. Fewer risks, less labor, greater productivity: Made in Italy quality and performance at the service of your job site.
Slope Stability
Tight Spaces
Single Operator
Made in Italy
Discover the C6X - C7X - C8X - C85 - CMF - C200 →
Tight spaces beside the house: easy hi-tip discharge
Read the story →
—
The Challenge
Working along the side of a house means dealing with extremely tight spaces and access points that are impossible for traditional equipment. Moving soil, sand or bark under these conditions takes a long time and demands heavy physical effort. Relying on a wheelbarrow or manual labor is neither sustainable nor efficient.
The Cormidi Solution
The Cormidi C85 Hi Tip is designed to operate in exactly these environments: compact tracks to squeeze through the narrowest passages, generous payload capacity to move soil, sand or bark without wasting time. The high-lift tipping skip allows you to discharge directly into a truck, into a skip, through a window, over a low wall, or to pour concrete for fencing — all with a single operator.
The Result
The job site runs smoothly even where nothing else can get through. A single operator handles transport and high-level discharge without any assistance, cutting both time and operating costs significantly.
Hi Tip
Tight Spaces
Single Operator
High-Level Discharge
Discover the C85 HI TIP →
Effortless log handling: grapple and CMF1500 at work
Read the story →
—
The Challenge
Moving and collecting logs on a jobsite is heavy, exhausting work. Without the right machine, multiple operators are needed and the risk of injury is high. Clearing the area takes a long time and requires a large workforce.
The Cormidi Solution
The CMF1500 equipped with a log grapple handles the job completely independently. The grapple grips and holds logs securely, allowing precise handling and fast site cleanup. A single operator manages the entire operation from the machine.
The Result
The jobsite is cleared efficiently, reducing working time and the number of people required. The CMF1500 and log grapple combination eliminates physical strain and lowers the risk of workplace injuries.
Log grapple
Single operator
Site cleanup
Discover the CMF 1500 →
C60: tight access, where others can't go
Read the story →
— Australia
From the jobsite
That's what we call tight access: in Australia the Cormidi C60 mini tracked dumper goes where others can't, through confined spaces and rough terrain.
Discover the C60 →
Excavation in tight spaces: the compact solution
Read the story →
Mini Dig Solutions —
The Challenge
Some job sites leave no room for conventional machines. Narrow access points, residential areas, fenced gardens: large equipment is often out of the question. A practical, agile, and reliable solution is needed to complete work where others simply cannot reach.
The Cormidi Solution
The Cormidi C7X is the concrete answer for excavation in confined spaces. Compact in size yet robust in performance, it gets into places where conventional machinery cannot operate. One operator, one machine: ease of use translates into outstanding productivity on site.
The Result
Mini Dig Solutions has built its entire business identity around this operational capability. Choosing the C7X allows them to take on contracts that competitors must turn down, expanding their market and delivering a reliable, high-quality service.
The name may have changed, but it's still the same owner, the same machine, and the same commitment to quality work and reliable service.
Owner, Mini Dig Solutions
Narrow access
Single operator
High productivity
Made in Italy
Discover the C7X →
30 Years on the Job: The C9.65 That Never Stops
Read the story →
—
The Challenge
A machine born in 1997, when Cormidi was still the dream of four brothers and a workshop full of ideas. Thirty years of tough job sites, heavy loads, and difficult conditions. The greatest challenge for any machine: standing the test of time without giving in.
The Cormidi Solution
The C9.65 was designed with a strong, stubborn core, built to last. Robust mechanics, uncompromising structural reliability. Made in Italy from the very first bolt. Thirty years later, the machine is still operational and works just like it did on day one.
The Result
After three decades of continuous service, the C9.65 is still running at full efficiency. Zero early replacement, zero scrapping. The machine's longevity proves that Cormidi reliability is not a slogan — it's reinforced concrete.
View the post on Instagram →
Thirty-year reliability
Made in Italy
Robust construction
Long service life
Cormidi
power buggy
tracked
skip
Discover the C9.65 →
Woodland management: C85 with Log Grab, forks and bucket
Read the story →
Barker Tree Service —
The Challenge
Those working in tree care and timber management often face different operations on the same job site: log handling, pallet transport, and excavation or material collection. Having multiple separate machines means high costs, more operators, and downtime for equipment changes.
The Cormidi Solution
The Cormidi C85 was supplied as a complete package: Log Grab for gripping and transporting logs, pallet forks for moving palletized loads, and a bucket for collection and excavation operations. A single multifunctional machine covers all the needs of a woodland job site, with quick changeover between attachments.
The Result
Barker Tree Service can now tackle every phase of the work with a single versatile machine, reducing the need for additional equipment. Job site productivity increases thanks to the flexibility provided by the C85's interchangeable attachment system.
View the post on Instagram →
Log Grab
Multifunctional
Interchangeable attachments
Single machine
Discover the C85 ml →
Overgrown boundary? The CMF clears it in one pass
Read the story →
—
The Challenge
The property line was choked with brush and young saplings grown right up to the fence: impossible to pass or clear with conventional machines.
The Cormidi Solution
The CMF forestry mulcher cut a clean path in a single pass, grinding brush and saplings on the spot, right up against the fence line.
The Result
No hauling and no burn piles: the material was mulched where it stood, giving back a clear, clean boundary, ready to build on or simply reclaim.
View the post on Instagram →
Forestry mulcher
One-pass clearing
Mulched on the spot
Heavy-duty use
Discover the CMF →
Product Spotlight: the Cormidi C7X tracked dumper
Read the story →
—
The Challenge
Moving material on sites with very tight access (side gates, passages under the house) where a standard machine simply won’t fit.
The Cormidi Solution
The C7X tracked dumper, just 722 mm wide, slips into the narrowest spaces with low ground impact and dumps up to 1.65 m high into skips and small trucks.
The Result
Material moved fast at up to 4.2 kph in a minimal footprint: save your back and speed up the job.
View the post on Instagram →
722 mm wide
Tight access
1.65 m dump
Low impact
Discover the C7X-700 →
C7X on tour: power and handling win over rental firms
Read the story →
Makinex —
The Challenge
Showing rental companies that a compact dumper can combine strength, maneuverability and simple controls, up to the demands of everyday site work.
The Cormidi Solution
The sales team took the C7X on a demonstration tour, putting it to work in the field and delivering the first units straight to hire yards.
The Result
The C7X made its mark in hire yards nationwide, praised for power and single-operator ease of use.
View the post on Instagram →
Hire-ready
Single operator
High maneuverability
Made in Italy
Discover the C7X →
No room to turn? The C8X Hi Tip goes where others can't
Read the story →
—
The Challenge
Hauling serious loads in seriously cramped spaces, where a wheelbarrow isn’t enough and big machines simply can’t get in.
The Cormidi Solution
The C8X Hi Tip tracked dumper, just 81 cm wide, high-tips up to 1.45 m on all-terrain tracks at speeds up to 6 km/h.
The Result
Up to 800 kg payload in a minimal footprint, now available in diesel too: perfect for landscaping, construction and backfilling.
View the post on Instagram →
1.45 m high tip
81 cm wide
800 kg payload
All-terrain tracks
Scopri la C8X HI TIP →
KB23 on the railway viaduct: precision and stability at height
Read the story →
ICEFE DUE - Gruppo LINEA VERDE GS — Ponte a Egola, Pisa
The Challenge
Maintenance and electrification of a railway line on a historic masonry viaduct at height. Near-zero error margins. Irregular surfaces, a constrained structural environment, and continuous operation under extreme professional conditions. The choice of aerial work platform was not a detail: it was the determining factor.
The Cormidi Solution
ICEFE DUE selected the KB23 for its high structural stability on irregular surfaces and at height, its load capacity suited to electrification and heavy maintenance operations, and its compact dimensions that allowed maneuvering even in the viaduct's restricted spaces. Three characteristics derived directly from the Made in Italy design and manufacturing in Roccadaspide. The delivery and training phase was managed with rigor by SAMI S.r.l., Cormidi dealer, ensuring full command of the machine from the very first operations.
The Result
The KB23 completed operations in a strategically significant infrastructure context, confirming cycle reliability and positioning precision under the most demanding conditions in the rail sector. A challenging jobsite brought to completion: proof that the machine holds up against the most stringent demands of the industry.
Stability at height
High load capacity
Compact dimensions
Made in Italy
Discover the KB23 →
2 photos
Tight urban jobsite: fresh concrete with zero downtime
Read the story →
Costruzioni Rota S.r.l. — Bergamo, Lombardia
The Challenge
Concrete stuck to the steel bucket. Mandatory cleanup after every cycle. Operators busy washing instead of working. Side access of only 90 cm.
The Cormidi Solution
C85 with 12 mm polyethylene bucket. Concrete doesn't adhere: just tilt and it slides off clean. Width 740 mm — fits where others can't. One operator, continuous cycles.
The Result
Zero cleanup at end of cycle. Less labor, less wasted time, more efficiency. One machine replacing three workers with wheelbarrows.
I never thought the bucket material could make such a difference. With the Poly we get twice the work done and go home without having to wash the machine.
Marco Rota, owner
Poly bucket
Zero concrete adhesion
740 mm width
Single operator
Discover the C85 →
3 photos
Firewood from 600 m: where the tractor can't reach, the C85 can
Read the story →
Azienda Agricola Ferretti — Ligurian Apennines
The Challenge
Coppice woodland on slopes exceeding 40%. No agricultural machine could access the site. Firewood was carried by hand — slow, exhausting, and dangerous.
The Cormidi Solution
C85 with tipping body: rubber tracks on uneven terrain, low center of gravity on steep slopes, continuous cycles from the forest to the collection point. Single operator.
The Result
Full load hauled in half a day versus 2 days by hand. Less fatigue, fewer risks for operators, more firewood moved per hour.
With the C85 we do in 4 hours what used to take 2 days of hard work. And it only takes one man.
Giovanni Ferretti, owner
Rubber tracks
40% slope
Low center of gravity
Single operator
Discover the C85 →
3 photos
Sloped terrain and mud: total stability, zero downtime
Read the story →
Previati Scavi S.n.c. — Vicenza, Veneto
The Challenge
Clay soil, winter rains, 8-meter elevation change. The previous dumper lost traction on downhill runs. Jobsite suspended multiple times. Excavator standing idle means doubled costs.
The Cormidi Solution
C85 with steel tracks: constant traction even on wet clay. Low center of gravity reduces rollover risk. The operator works safely throughout the entire shift.
The Result
Zero weather-related stoppages. Fewer risks for the operator, more productive hours. No service calls in 14 months.
After the first season with the C85 I would never go back. A machine that never stops.
Luca Previati, Owner
Steel tracks
Slope stability
Low center of gravity
Fast support
Discover the C85 →
Sand foundations: the C200 never keeps the excavator waiting
Read the story →
Costruzioni Nencini S.r.l. — Florence, Tuscany
The Challenge
A 5-ton excavator running non-stop. Every minute waiting for the dumper meant lost time and money. The previous machine couldn't keep up with the pace.
The Cormidi Solution
C200 with seated operator: high travel speed, stress-free cycles. Hydrostatic drive eliminates fatigue during long shifts. Real payload capacity that clears the excavation without downtime.
The Result
The excavator never had to wait. Fewer operators needed, faster rhythm, lower costs. Foundations completed ahead of schedule.
The machine is tough, the service is fast, and spare parts arrive the next day. I've never lost a single day to a breakdown.
Gianni Nencini, Technical Director
Seated operator
Hydrostatic drive
Real payload
24h spare parts
Discover the C200 →
