C200 Mini tracked dumper 2000 kg
2000 kg. Maximum load capacity.
C200 is a tracked mini dumper made by Cormidi S.r.l. (Roccadaspide, Italy). Its operating capacity, as declared by the manufacturer, is 2000 kg. Engine: Yanmar 3TNV82 (diesel, 25.6 hp). Key facts: tracks 280 mm wide; frontal gradeability when loaded 52% (27°); 4 configurations available; warranty up to 3 years.
Data source: official Cormidi technical datasheet. Measurement: capacity declared by the manufacturer. Last technical revision: 16/09/2026.
You get on, sit down and control two tonnes with a finger: multi-function joystick and Soft Drive servo-assisted steering make every manoeuvre precise and effortless, even during the longest shifts.
The skip self-loads, rotates and tips 90+90 degrees: you discharge exactly where needed without ever repositioning the machine. A single machine to load, transport and unload.
Carries up to 2000 kg where smaller machines stop: low centre of gravity, 280 mm wide tracks and two-pump hydrostatic transmission give you traction and control on the most demanding terrain.
Frame with ROPS, roll-bar and bull-bar, heavy duty components and a virtually indestructible undercarriage: the C200 is built for continuous jobsite use, with extreme reliability and reduced fuel consumption.
Seat, multi-function display, Inclitech Cockpit inclinometer, directional lights and battery isolator as standard: you work safely and in full control in every condition.
Daily checks, fluid levels, filters and fuses are all easily accessible: less downtime, more time producing.
| ENGINE | |
|---|---|
| YANMAR 3TNV82 | |
| Fuel Type | Diesel |
| Number of Cylinders | 3 |
| Displacement (cm³) | 1331 cm³ |
| Power | 25.6 Hp@2800 rpm |
| Cooling | Water |
| Starting | Electric |
| Emissions | Stage V - EPA Tier 4 |
| TRANSMISSION | |
| Transmission | Hydrostatic |
| Piston pump (variable flow) | n° 2 (90 lt/min overall) 280 bar |
| Heavy duty hydraulic motors | Heavy duty |
| HYD SYSTEM | |
| Gear flow pump | 27 lt/min - 150 bar |
| UNDERCARRIAGE | |
| Track width | 280 mm |
| Track type | Long life Cormidi |
| Track tensioning | Spring + grease track tensioner |
| Rollers | Oscillating with permanent lubrication |
| EQUIPMENT | |
| Special anti-acid stickers | Standard |
| Temperature alarm buzzer | Standard |
| Super-quiet engine hood | Standard |
| Hour meter | Standard |
| Multi-function display | Standard |
| Electric-controlled parking brake with joystick button | Standard |
| Servo-assisted steering "Soft Drive" | Standard |
| Inclitech Cockpit (tilt control) | Standard |
| Multi-function joystick controls | Standard |
| Sealed operator's manual holder | Standard |
| 12 Volt socket | Standard |
| HYD oil radiator | Standard |
| ROPS | Standard |
| Heat-treated special alloy wheels and rollers | Standard |
| Seat | Standard |
| Jack safety supports | Standard |
| PERFORMANCE | |
| Speed | 6.6 Km/h |
| Load capacity | 2000 Kg |
| Maximum forward grade capability (unloaded) | 91% (42°) |
| Maximum side slope tolerance (unloaded) | 79% (38°) |
| Ground bearing pressure (unloaded) | 0.27 kg/cm² |
| Maximum climbable gradient forward (loaded)* | 52% (27°) |
| Maximum side slope tolerance (loaded)* | 61% (31°) |
| Ground bearing pressure (loaded) | 0.51 kg/cm² |
* For the exact value of your machine, consult the supplied user manual and verify the exact model match.
One for every need.
standard.
Other models
Want to learn more?
Our technicians will respond within 24 hours.
