Home › Machines › Dumpers › C85E

C85E Mini tracked dumper 800 kg

800 kg. Zero exhaust emissions. All the Cormidi power.

C85E is a tracked mini dumper made by Cormidi S.r.l. (Roccadaspide, Italy). Its operating capacity, as declared by the manufacturer, is 800 kg. Key facts: tracks 180 mm wide; frontal gradeability when loaded 71% (35°); 9 configurations available; warranty up to 3 years.

Data source: official Cormidi technical datasheet. Measurement: capacity declared by the manufacturer. Last technical revision: 08/10/2026.

800 kg
Net payload
up to 4.5 km/h
Max speed
71 %
Load grade
9
Configurations
5,5 kW
Rated power
5 h
220V charging
Configure your machine →
Browse brochure online
C85E -- Brochure
↓ Download PDF
100% electric, zero compromise

All the power of a C85, but battery-powered: 800 kg load capacity, zero tailpipe emissions and reduced noise levels. Indoor work, night shifts, historic city centres and greenhouses — where a combustion engine cannot even enter.

A battery that lasts for years

11.8 kWh LiFePO4 lithium pack, over 3,000 life cycles. Full charge in 5 hours from a standard outlet, 2.5 hours on three-phase: ready in the morning, and it stays in shape season after season.

Three modes, one control

From the touchscreen cockpit you choose between Normal, Performance and Hyper: more autonomy when you need to last the whole shift, more push when the work gets tough. You decide, stroke after stroke.

It climbs where others stop

Up to 77% gradient empty and 71% fully loaded. Electric torque is instant, with no hesitation and no drop on the climb: the push is there from the very first inch.

Quiet and clean, for whoever drives it

No exhaust fumes, no engine vibration: the operator works better and longer. The right choice where clean air and quiet aren't a luxury but a necessity.

C85E: The machine that doesn't just work, it dominates.
Choose power. Choose excellence. Choose C85E

Verified technical data

ModelC85E
ManufacturerCormidi S.r.l., Roccadaspide (SA), Italia
Machine typeTracked mini dumper
Operating capacity800 kg
Hydrostatic transmissionn° 2 (58 lt/min total) 250 bar
Service hydraulic systemno. 1 (10 L/min) 140 bar
Track width180 mm
Available configurations9
Warrantyup to 3 years
Data sourceOfficial Cormidi brochure
Data updated as of08/10/2026

Values read from the official technical datasheet of the machine. For the complete detail see the "Technical specifications" table below.

ENGINE
TypeElectric
Full power5,500 W
Peak power6,500 W
Voltage24 VDC
Current414 Ah
BATTERY
Capacity11.8 kWh
Volt24 V
TypeLiFePO4
Cycle life> 3000
BATTERY CHARGER
Single-phase 220/110 V5 hr (100%)
Three-phase system 380 V (optional)2.5 hr (100%)
TRANSMISSION
TransmissionHydrostatic
Piston pump (variable flow)n° 2 (58 lt/min total) 250 bar
Heavy duty hydraulic motors Heavy duty
HYD SYSTEM
Standard-flow gear pumpno. 1 (10 L/min) 140 bar
UNDERCARRIAGE
Track width180 mm
Track typeLong life Cormidi
Track tensioningSpring + adjustment screw
RollersOscillating with permanent lubrication
EQUIPMENT
3.5" touchscreen cockpit with 3 power levels (STD / PF / HP) Standard
Special anti-acid stickers Standard
Temperature alarm buzzer Standard
Special Long Life low-vibration track "TVL System" Standard
Super-quiet engine hood Standard
Hour meter Standard
Automatic engine compartment temperature control "VCT System" Standard
Automatic speed control on slope "CVD System" Standard
Dual piston parking brake Standard
Lifting and transport tie-down hooks Standard
Up to 3-year warranty Standard
Inclitech Cockpit (tilt control) Standard
Smart foldable and cushioned operator platform Standard
Sealed operator's manual holder Standard
12 Volt socket Standard
HYD oil radiator with automatic electric fan Standard
Heat-treated special alloy wheels and rollers Standard
Jack safety supports Standard
PERFORMANCE
Speed 4.5 Km/h
Load capacity 800 Kg
Maximum forward grade capability (unloaded)77% (38°)
Maximum side slope tolerance (unloaded)82% (39°)
Ground bearing pressure (unloaded)0.22 kg/cm²
Maximum climbable gradient forward (loaded)*71% (35°)
Maximum side slope tolerance (loaded)*34% (19°)
Ground bearing pressure (loaded) 0.52 kg/cm²

* For the exact value of your machine, consult the supplied user manual and verify the exact model match.

Configuration range
9 available versions.
One for every need.
RI
Hydraulic tipping
800 kg
PAYLOAD
0,28 m³
STRUCK
0,36 m³
HEAPED SAE
Cormidi C85E RI dimensioni
Technical drawing dimensions in mm · 1 in = 25.4 mm · 1 ft = 304.8 mm
RIX
Hydraulic tipping with 180° rotating skip
800 kg
PAYLOAD
0,33 m³
STRUCK
0,42 m³
HEAPED SAE
Cormidi C85E RIX dimensioni
Technical drawing dimensions in mm · 1 in = 25.4 mm · 1 ft = 304.8 mm
RIA
Hydraulic tipping with agricultural body
800 kg
PAYLOAD
0,19 m³
STRUCK
0,31 m³
HEAPED SAE
Cormidi C85E RIA dimensioni
Technical drawing dimensions in mm · 1 in = 25.4 mm · 1 ft = 304.8 mm
RI-POLY
Hydraulic tipping with polypropylene skip
800 kg
PAYLOAD
0,39 m³
STRUCK
0,53 m³
HEAPED SAE
Cormidi C85E RI-POLY dimensioni
Technical drawing dimensions in mm · 1 in = 25.4 mm · 1 ft = 304.8 mm
RIX-POLY
Hydraulic tipping 180° rotating in polypropylene
800 kg
PAYLOAD
0,39 m³
STRUCK
0,53 m³
HEAPED SAE
Cormidi C85E RIX-POLY dimensioni
Technical drawing dimensions in mm · 1 in = 25.4 mm · 1 ft = 304.8 mm
AC-ACW
Self-loading with rotating bucket
800 kg
PAYLOAD
0,25 m³
STRUCK
0,34 m³
HEAPED SAE
HI
High discharge
800 kg
PAYLOAD
0,28 m³
STRUCK
0,36 m³
HEAPED SAE
Cormidi C85E HI dimensioni
Technical drawing dimensions in mm · 1 in = 25.4 mm · 1 ft = 304.8 mm
HAC-HCW
High discharge with self-loading
800 kg
PAYLOAD
0,25 m³
STRUCK
0,34 m³
HEAPED SAE
ML
Hydraulic mini loader with bucket
285 kg
PAYLOAD
Only on Cormidi
Key Strengths.
Safety
  • Parking brake
  • Digital inclinometer for stability control
  • Folding, cushioned footboard
Performance
  • High speed
  • High load capacity
  • High power-to-weight ratio
  • Very high penetration force
Technology
  • Closed-circuit hydrostatic transmission with 2 variable-displacement piston pumps
  • Undercarriage with oscillating rollers to extend track life
  • Hydraulic oil cooling with radiator and thermostat
  • Extremely sturdy load-bearing frame
  • Electric start as standard
  • 412 Ah battery
  • Digital display
  • Multiple configurations
  • Special radio-controlled version
Maintenance
  • Reduced maintenance
  • Soundproofed hood
C85E: the machine that doesn't just work.
Choose power. Choose excellence. Choose C85E
Download Brochure ↓
Dumper Family

Other models

View all →

Want to learn more?

Our technicians will respond within 24 hours.

Request information +39 0828 943688
From the jobsite
19 October 2026 C85E: working on slopes, numbers in hand
REQUEST INFORMATION

Let's talk about your C85E.

Write to us here: your request already carries the model, and our technicians reply within 24 hours.

    First and Last Name *

    Company

    Email *

    Phone

    Message