19 October 2026
C85E: working on slopes, numbers in hand
The C85E is designed to tackle steep terrain: here is what the slope data says and what concretely changes on the job site.
Read →From the jobsite
Real work stories with Cormidi machines: what can be carried on a slope, what fits through a narrow gate, how much a machine actually weighs on wet grass. Data taken from technical datasheets, facts taken from job sites.
8 October 2026
C85 on slopes: what the numbers really say
The working gradients of the C85 tracked mini dumper, what they mean in the field and why they matter when the ground is not flat.
Read →
28 September 2026
C7X on slopes: the numbers that matter when the ground rises
Working on embankments and inclined terrain requires machines with clear stability data: here is what the C7X declares unloaded and under load.
Read →18 September 2026
C6X on slopes: what the numbers say when the job site goes uphill
The C6X tracked mini dumper by Cormidi works on gradients that challenge many machines: here is what the slope data declares and what it means in…
Read →
8 September 2026
C40: carrying 400 kg on difficult terrain with a machine that gets where others can't
The C40 tracked mini dumper by Cormidi carries 400 kg of material with a Honda GX160 4.8 hp engine, on any surface and through the narrowest…
Read →
29 August 2026
C200: 2000 kg on tracks, no compromises
When the material to be moved exceeds the capacity of a light dumper, the C200 responds with a 2000 kg payload and a 25.6 hp diesel…
Read →
29 August 2026
Fragile and finished ground: ground pressure counts
The C200 exerts only 0.27 kg/cm² unloaded and 0.51 kg/cm² at full load: here's what that means for those working on delicate ground or slopes.
Read →
29 August 2026
C200 on slopes: what it can really do on uphill terrain
Working on slopes is not the same for every machine: here is the real data for the C200 unloaded and at full load.
Read →