C200: 2000 kg on tracks, no compromises

On a jobsite, the moment often comes when the machine you have just isn’t enough. The gravel pile is too large, the concrete blocks are too heavy, the ground is soft and you can’t afford an extra trip. This is where you need a machine sized for the real load, not the ideal load.

2000 kg: a payload that changes the way you work

The C200 carries up to 2000 kg per cycle. This isn’t just a spec sheet number: it’s the difference between making two trips and making one. A crew working on a foundation, an excavation or a paver installation understands this immediately. Fewer stops, fewer maneuvers, more material moved in the same workday.

The engine that moves that weight

Powering the C200 is a Yanmar 3TNV82, three cylinders, displacement of 1331 cc, output of 25.6 hp at 2800 rpm. Water-cooled, electric start. An engine built to work for a long time, not to shine on a brochure’s numbers.

Emissions are certified Stage V – EPA Tier 4. This means the machine is admitted on urban jobsites and in environmentally restricted areas without needing waivers or running into issues during the bidding phase.

What holds payload and engine together

A tracked machine carrying 2000 kg must be stable on difficult terrain. It must go where the operator goes: mud, slopes, uneven surfaces. The C200 is designed so that the declared payload is the real payload, even off pavement. Transport speed reaches 6.6 km/h: sufficient to work safely even in tight spaces or on downhill runs.

Three points to keep in mind

• Payload: 2000 kg per trip, tracked, on any surface.
• Engine: Yanmar diesel 25.6 hp, Stage V – EPA Tier 4, water-cooled.
• Warranty: up to 3 years, as with the entire Cormidi range.

Bring the C200 to your jobsite and see what changes when the payload is the right one.