C85: the tracked mini dumper that dominates every slope

There is a precise moment when the wheel gives up. Wet ground, unstable surface, a slope that exceeds every expectation: conventional traction fails. The C85 no.

Tracks that never let you down

The rubber tracks of the 180 mm of the C85 distribute the load across the entire contact surface, reducing slippage even on soft, slippery or steeply inclined ground. It is not a matter of brute power: it is geometry, it is continuous contact, it is grip calculated metre after metre.

The oscillating rollers follow every ground irregularity in real time. The track always stays on the ground. Traction remains constant.

Hydrostatic transmission: you decide the speed

No gear to engage. No gear to select. The hydrostatic transmission of the C85 translates every lever movement into a proportional and progressive response. Downhill as well as uphill, unloaded as well as at full load, speed remains under the operator's direct control.

The result is a manoeuvring precision that no traditional mechanical system can replicate: the machine responds, it does not interpret.

850 kg. Where it's needed.

The payload capacity of 850 kg of the C85 is not a nameplate figure: it is the concrete measure of what this mini dumper carries under real conditions, on real terrain, on job sites where every metre of progress has a cost.

Construction materials, soil, gravel, debris: it all goes up. Where a wheelbarrow would require ten trips and an exhausted operator, the C85 gets the job done continuously, in a controlled and efficient manner.

Built in Roccadaspide, engineered to last

The C85 is built at the plant Cormidi di Roccadaspide, in Campania. Every structural component is designed to withstand the most severe stresses: torsion, impacts, repeated load cycles under intensive jobsite conditions.

• Rubber tracks from 180 mm in width
• Oscillating rollers for continuous adaptation to the ground profile
• Hydrostatic transmission without manual gearbox
• Payload capacity up to 850 kg

When the terrain puts the machine to the test, the C85 responds with traction, control and load capacity that turn the obstacle into a path.